LeeSti BrytDyt semi recessed is a lighting system in aluminum extrusion with proprietary LED boards. With diffuser and special film that hides the dots of the LED boards if direct, indirect with no film, for higher output if reflective surface is not glossy. Programmable drivers allow the use of special output. Levels are suggested ones for covering a huge spectrum, drivers are programmable at factory. Three aiming angles possible, 15, 30 and 45 degree. Setting up at factory and possible adjustment at site requesting devices to factory. Angles are fixed so there is a precise aiming of light per designer’s specs. Installation as indirect lighting, distance to ceiling minimum 12" (optimal 18 to 24 inches). Lighting fixture prepare to be installed at 5/8" drywall. Drivers are remote up to 80 feet or integral at back (with access to change the driver in a box to make the splice). No more issues with joists or studs.

---

LeSeBry -

Lumen Output

3017 - 3000 K 1200 lumens / ft 12 w /ft
3014 - 3000 K 1000 lumens / ft 10 w /ft
3011 - 3000 K 780 lumens / ft 7.5 w /ft
3008 - 3000 K 560 lumens / ft 5.5w /ft
3005 - 3000 K 350 lumens / ft 3.1 w /ft
3517 - 3500 K 1200 lumens / ft 12 w /ft
3514 - 3500 K 1000 lumens / ft 10 w /ft
3511 - 3500 K 780 lumens / ft 7.5 w /ft
3508 - 3500 K 560 lumens / ft 5.5w /ft
3505 - 3500 K 350 lumens / ft 3.1 w /ft
WhTu - White tuning 2700K @ 1050 lumens/foot and 6500k @1200 lumens/foot 12.5 watt/foot

Finish

Custom
WH - White
BK - Black
CU - Custom Color - Specify RAL color

Dimming

O - Non dimmable 120v
1 - Non dimmable 277v
4 - Dimmable 0-10v (4wires, 120 or 277 v)

Flange

Ts - Trimless
Tm - Trim

Aiming angle

15d - Angle 15 degree from Vertical
30d - Angle 30 degree from Vertical
45d - Angle 45 degree from Vertical

Runs

No. of B - 2' nominal 24 1/4"
No. of C - 3' nominal 34 3/4"
No. of D - 4' nominal 46 3/4"
No. of E - 5' nominal 57 1/4"
No. of F - 6' nominal 69 1/4"
No. of G - 7' nominal 79 3/4"
No. of H - 8' nominal 91 3/4"
(0)B (0)C (0)D (0)E (0)F (0)G (0)H

Space position

Wup - Wall Up
Wdn - Wall Down
Cei - Ceiling washer

Light Shielding

No. of Dd - Frosted diffuser - Use if reflected surface is gloss so dots of boards are not seen
No. of Nof - No film - No film to use indirect if surface is not gloss so dots can't be seen as a reflection
(0)Dd (0)Nof

Emergency

No. of 00 - No Emergency
No. of EM - Emergency - Specify qty only if Emergency
(0)00 (0)EM

 

 

Create Cut Sheet